Pro Wash/Dry uses mechanical jetting to rapidly deliver IPA to printed parts. This unique method provides excellent of agitation, reducing wash duration while offering improved cleaning power.
Thanks to a suite of automatic features, the only time you have to touch IPA is when you pour it into the reservoirs. Automatic pumps recycle alcohol, and quick-connect hoses whisk it away.
Pro Wash/Dry was designed with input from the dental community. Inspired by DIY kits all over the world, we leveraged the latest technology (and invented some of our own) to deliver a superior washing experience.
Mechanical Jetting: As Fast as it Sounds
Fluid Mechanics: The Stuff of Patents
You’ve never washed parts like this before. Thanks to its high-powered motor, precisely manufactured propeller, and innovative alcohol delivery method, Pro Wash/Dry can complete a full two-stage wash and dry in less than nine minutes.
10 Minutes Wash/Dry
SprintRay Pro Wash/Dry
Automated Bucket Wash
2 Cycle Wash + Rapid Dry
Submerging your parts in IPA can get the job done, but it results in a lot of waste alcohol. Pro Wash/Dry uses a patented method to agitate and clean without full submersion. The result: cleaner parts, less waste, and faster workflows.
3 Cycles, One Touch
Set and Forget: Hands-free Process
Never Think About IPA Again
Science Removes the Guesswork
Pro Wash/Dry comes with precalibrated hydrometers that sink in clean IPA and float when it's dirty. Since you always know when it's time to refresh your IPA, your parts will always come out clean.
Efficiency to Write Home About
Pro Wash/Dry can operate with a little as a half-liter of alcohol thanks to the unique way it delivers IPA to your parts. It's a small victory for your pocketbook, a big win for the environment, and a quantum leap in 3D printing wash efficiency.
500mL to Start
Touchless Alcohol Recycling
Advanced electronics and mesh-wire plumbing connect all the chambers in Pro Wash/Dry. Recycle dirty alcohol from one chamber to the other with the press of a button. No mess required.
Quick-connect IPA Draining
To drain IPA from Pro Wash/Dry, we've provided a quick-connect hose. It snaps into place, creating a water-tight seal instantly. When you're finished draining, simply press the release ring to instantly stop the flow.
Clean IPA Removal
Easy to Use, Easy to Own
We know that one of the most precious resources in a dental clinic is time. So in addition to making Pro Wash/Dry run an extremely fast cycle, we made it dead simple to operate. If your staff can operate a smartphone, they can use Pro Wash/Dry with very little training. And to reduce maintenance, we sourced innovative materials that are resistant to chemicals.
Industrial Grade Materials
Shrouded Control Panel
To prevent chemicals from dripping onto the touchscreen computer, we set the electronics back under a small shroud. One less thing to worry about.
Automatic Wash Mode Detection
Pro Wash/Dry was designed to fit the SprintRay Pro build platform. But when you need to wash loose parts, simply insert the basket, close the lid, then hit start.
Automatic Stop/Start Failsafe
If you remove the platform or open the lid during a wash cycle, you don't have to worry about creating a mess. Automatic Stop safeguards your workspace.
Fill Level Sensors
With extra tolerances built-in to the reservoir designs and sensors monitoring fill levels, you'll feel confident no matter who uses Pro Wash/Dry.
Platform Wash Envelope
17 x 12.7 x 7.6 cm
7 x 5 x 3 in
Basket Wash Envelope
17 x 12.7 x 12.7 cm
7 x 5 x 5 in
Liquid Saturation Monitoring System
Wash Liquid Compatibility
Isopropyl alcohol 91% (Recommended)
Isopropyl alcohol 99%
1 Quick Connect Drain Hose with Automatic Cut-off
Wash Liquid Capacity
2 liters per reservoir
Minimum Wash Solution Required
500 mL Per Reservoir
3.5" color touch-screen
Pre-defined Wash/Dry preset
Platform vs Basket Detection
Fill Level Sensor
30 x 30 x 46 cm
12 x 12 x 18 in
36 x 36 x 50 cm
14 x 14 x 20 in