Pro Wash/Dry

Multistage Automated Washing System
Designed for Dental 3D Printing

Order
Brochure
Product Specifications

SprintRay Pro Wash/Dry is the first fully-automated, two-stage wash and dry system built to deliver the speed, cleanliness, and ease-of-use demanded by the modern 3D printing dental clinic.

Image

Fast

Pro Wash/Dry uses mechanical jetting to rapidly deliver IPA to printed parts. This unique method provides excellent agitation, reducing wash duration while offering improved cleaning power.


Clean

Thanks to a suite of automatic features, the only time you have to touch IPA is when you pour it into the reservoirs. Automatic pumps recycle alcohol, and quick-connect hoses whisk it away.


Easy

Pro Wash/Dry was designed with input from the dental community. Inspired by DIY kits all over the world, we leveraged the latest technology (and invented some of our own) to deliver a superior washing experience.

Image

Mechanical Jetting: As Fast as it Sounds


PATENTED


Fluid Mechanics: The Stuff of Patents

You’ve never washed parts like this before. Thanks to its high-powered motor, precisely manufactured propeller, and innovative alcohol delivery method, Pro Wash/Dry can complete a full two-stage wash and dry in less than nine minutes.

10 Minutes Wash/Dry


SprintRay Pro Wash/Dry
Wash Efficiency
Automated Bucket Wash
Wash Efficiency
Ultrasonic Cleaner
Wash Efficiency

2 Cycle Wash + Rapid Dry

Submerging your parts in IPA can get the job done, but it results in a lot of waste alcohol. Pro Wash/Dry uses a patented method to agitate and clean without full submersion. The result: cleaner parts, less waste, and faster workflows. 

3 Cycles, One Touch


Set and Forget: Hands-free Process

Pro Wash/Dry was built to be used with SprintRay Pro. Once your print job is finished, simply place your platform in the cradle and press 'Start'. Pro Wash/Dry will automatically perform a two-stage wash and then dry your parts.

Effortless Speed

Image

Never Think About IPA Again


Science Removes the Guesswork

Pro Wash/Dry comes with precalibrated hydrometers that sink in clean IPA and float when it's dirty. Since you always know when it's time to refresh your IPA, your parts will always come out clean.

Pre-calibrated


Image

Dirty Job,
Clean Workstation


Efficiency to Write Home About

Pro Wash/Dry can operate with a little as a half-liter of alcohol thanks to the unique way it delivers IPA to your parts. It's a small victory for your pocketbook, a big win for the environment, and a quantum leap in 3D printing wash efficiency.

500mL to Start


Touchless Alcohol Recycling

Advanced electronics and mesh-wire plumbing connect all the chambers in Pro Wash/Dry. Recycle dirty alcohol from one chamber to the other with the press of a button. No mess required.

Reduced Waste


Quick-connect IPA Draining

To drain IPA from Pro Wash/Dry, we've provided a quick-connect hose. It snaps into place, creating a water-tight seal instantly. When you're finished draining, simply press the release ring to instantly stop the flow.

Clean IPA Removal

Image

Easy to Use, Easy to Own

We know that one of the most precious resources in a dental clinic is time. So in addition to making Pro Wash/Dry run an extremely fast cycle, we made it dead simple to operate. If your staff can operate a smartphone, they can use Pro Wash/Dry with very little training. And to reduce maintenance, we sourced innovative materials that are resistant to chemicals. 


Industrial Grade Materials

Made with an aluminum chassis and chemical-resistant, translucent plastic, Pro Wash/Dry requires almost no maintenance.

Shrouded Control Panel

To prevent chemicals from dripping onto the touchscreen computer, we set the electronics back under a small shroud. One less thing to worry about.


Automatic Wash Mode Detection

Pro Wash/Dry was designed to fit the SprintRay Pro build platform. But when you need to wash loose parts, simply insert the basket, close the lid, then hit start.


Automatic Stop/Start Failsafe

If you remove the platform or open the lid during a wash cycle, you don't have to worry about creating a mess. Automatic Stop safeguards your workspace.


Fill Level Sensors 

Pro Wash/Dry knows how much IPA it has in each chamber, so if there is insufficient volume it will gently remind you to add more.

Overflow Protection

With extra tolerances built-in to the reservoir designs and sensors monitoring fill levels, you'll feel confident no matter who uses Pro Wash/Dry.


Image

Technical Specifications

Platform Wash Envelope

17 x 12.7 x 7.6 cm
7 x 5 x 3 in

Basket Wash Envelope

17 x 12.7 x 12.7 cm
7 x 5 x 5 in

Liquid Level Monitoring System

Conductive Sensor

Liquid Saturation Monitoring System

2 Pre-calibrated Hydrometers

Wash Liquid Compatibility 

Isopropyl alcohol 91% (Recommended)
Isopropyl alcohol 99%
Ethanol

Liquid Disposal Method
2 Standard Quick Connect Drain Ports
1 Quick Connect Drain Hose with Automatic Cut-off

Wash Liquid Capacity

2 liters per reservoir

Minimum Wash Solution Required 

500 mL Per Reservoir

User Controls

3.5" color touch-screen
Pre-defined Wash/Dry preset

System Controls
Microcontroller with upgradable firmware via USB
Safety Sensors
Automatic Start/Stop Sensors
Platform vs Basket Detection
Fill Level Sensor

Power Requirement

100–240v (Via DC Adapter)
Dimensions

30 x 30 x 46 cm
12 x 12 x 18 in

Packaging Dimensions

36 x 36 x 50 cm
14 x 14 x 20 in

Image
Cutting-edge Digital Dentistry Powered by SprintRay

The SprintRay 3D printing ecosystem is designed for the unique needs of dental professionals. With SprintRay as your partner, pushing the boundaries of what’s possible in dentistry has never been easier.

Schedule Consultation

Desktop 3D Printer
Automated Wash/Dry
Automated Post-processing
3D Printing Materials
3D Printing Software