We believe that a well-trained users are the key to success. We live for dental 3D printing and we’re proud to offer this training plattform. Familiarize yourself with dental 3D printing, show it to your staff, and become in expert in 3D printing.
Welcome to the SprintRay family! This sequence of videos is designed to get you up and running, from unboxing to completing your first print.
Instructional videos for using SprintRay Dashboard 2.0 to order occlusal guard designs.
A selection of videos to help you and your staff become 3D printing experts.
Congratulations on your new SprintRay Pro! Here’s how to get your new printer set up.
Dashboard Registration
Unboxing and Setup
Connecting Your Printer to Wi-Fi
Connect to Dashboard
Connecting Your Printer to Hotspot
RayWare allows you to communicate and control your printer. These videos guide you through the essentials.
Importing STL Files
Deleting Files from Virtual Build Platform
Setting Up and Sending to Print
Fixing Scans and Support Structures
Software Installation
PC Firewall Setting
Every digital workflow starts with a good, clean intraoral scan.
Export STL from TRIOS
Proper mixing, storage, filtration, and disposal of resin is essential to getting consistent, repeatable results with your 3D printer.
Mixing Resin
Proper Storage and Filtering of Resin
Proper Disposal of Resin
Proper Resin Handling
Learn the basics of printing on your Pro from preparation to print removal.
Prepare for Print
Selecting Layer Thickness
Resin Tank Heating
Print from USB
Queueing Prints
Print Removal
This critical step is simplified with SprintRay Pro Cure and Pro Wash/Dry, allowing you to rapidly wash, dry, and cure your parts.
Operating Your Pro Cure
Unboxing and Set-up of Your Pro Wash/Dry
Operating Pro Wash/Dry
Cleaning Pro Wash/Dry
Changing the Pro Wash/Dry Filter
Updating your Pro Wash/Dry Firmware
Proper cleaning and maintenance will help ensure smooth operation from your Pro for years to come.
Cleaning the Optical Window
Cleaning Your Build Platform
Cleaning Your Resin Tank
Something not quite right? Some of the most common troubleshooting procedures are covered in these videos.
Verifying Optical Window Conditions
Fitment Calibration
Dimensional Accuracy Calibration
Disposal of Failed Prints
Why Prints Fail
Troubleshooting After Print Failure
Proper understanding of workflow requirements helps you get the most out of your investment in 3D printing.
Bego VarseoSmile Crown Plus Workflow
Preparing Night Guards for Print with Keysplint Soft
Proper understanding of the clear aligner workflow helps you get the most out of your investment in 3D printing.
Aligner fabrication with the Drufomat Scan
Preparing STL files for model printing
Preparing models for vacuum thermoforming
Post Processing Clear Aligners
How to prepare for your Pro.
Required consumables and included accessories
Printer Placement
Stai visualizzando un contenuto segnaposto da Hubspot Embedded Content. Per accedere al contenuto effettivo, clicca sul pulsante sottostante. Si prega di notare che in questo modo si condividono i dati con provider di terze parti.
Ulteriori informazioniStai visualizzando un contenuto segnaposto da HubSpot. Per accedere al contenuto effettivo, clicca sul pulsante sottostante. Si prega di notare che in questo modo si condividono i dati con provider di terze parti.
Ulteriori informazioniStai visualizzando un contenuto segnaposto da Hubspot Meetings. Per accedere al contenuto effettivo, clicca sul pulsante sottostante. Si prega di notare che in questo modo si condividono i dati con provider di terze parti.
Ulteriori informazioni